Before learning the Using system of SSb cb radio, you have to understand some basic thing of CB or SSB Cb.
Let’s Begin. What should you know??
No-1> What is SSB Radio stand for?
No-2> Listen Before talk.
No-3> Law about CB radio.
No-4> Turn Right Channel.
No-5> why ssb cb different for others.
No-6> How does it work?
Let’s begin with no-1.
What is SSB cb radio stand for?
The Radio stand for Single-Sideband Citizens Band Radios It has the high power Cb that can transmit Future. Hear How you can use these types of radio.
No-2- Listen before talk.
The system is using a what is ssb cb radio is so easy, just like a piece of cake. Very first, you have to understand the basic and rules Of it. The both of ssb and cb are uses AM and they do not get along. Everyone go to the others persons radio. The most common mode is AM cb and the truckes Use the AM and their choosing to channel no is 19 The side effect is the radio It happened a noise of squeal on using the ssb. In this cause many ssb cb users stand to channel 16 and channels 34. But here is the goal, AM’ers they are called it and since they are use these channels, Of course It’s not most of theme are’t use it but Fewer of them are still the Upper channels and less noise channels to contend with.
No-3- law of cb radio.
There are most of the ssb cb show their activity for a long range. Here is a most common habit or hobby as you called of whom use the ssb radio. Be patient, just tell you what is the hobby. The hobby is DX. But keep in mind this is out of legal. Also, there is a FFC who sent a limit of distance 155 miles for the cb service.
So, What you think??
Yes, You thought is great. You can use the ssb for taking help where the others cb radio users doesn’t Think it.
No-4- Tune right Channel.
To tune right channel on sbb you ,must have a radio. Very first to tuning the right channel You have to tune an unofficial ssb cb channel like 38 then choose the other Upper also lower sideband form the selection button or switch. Next, Tune a tune the clarified control switch until you have heard a relax able voice. The voice sound may like “Daka Donald” at begging time. To starting a call on ssb radio can say CQ, CQ….You have to make up a HANDLE to referring yourself. Many of the Radio users according to the radio Operator to take or make up their number. But the best thing is you can take a number as like your choice or That is familiar with you.
Here is an example-
Imagine, your old plus the word “since”. So, this will be like “CQ, CQ from since 40”. On the other hand The other operators use a handle “XXX”. There are no actual rules to getting call signs although cb does not say for license.
Here are some channels frequency list for you click here to getting the list.
No-4-Why ssb cb are different from others-
There are a few reasons for choosing a ssb radio.
1. Single sideband has more signal also with a smaller amount frequency. So, Based on the much signal it is the best.
2. It can compare with the AM cb Radio for their PEP-“peak envelope power. The PEP has twelve Watts.
3. It allows you to contract in the long range. But you should never forget their FFC is 155 rule.
4. Something you can here like someone calls “CQ HX” “CQ, DX” etc. You can hear it just from the ssb. One the high quality radio but keep in mind it is violated of law.
5. It made by Cobra, Connex, Galaxy. So it is the kick to choosing the Radio also this reasons the radio is different from others.
How does it works??
Now here’s the deal. You may know some ssb radio have almost 120 channels. Their the most channels are marketing types. The cb radio’s who are stay in the United states, They can transmit amplitude modulation signal or singlesidebandd signal. The AM radio based on two types of Radio signal and their every contain the operator’s voice also with a so called carrier. On the other hand the ssb signals used onsidebandss. The sideband ssb channels actually based on Upper and lover half of the 40 regular channels. Both of AM and SSB signals on the same channel also it will interfere to each other. The kicker is, If you try to mixg two signals with different from others signals, you will discover two new signals. So, the one signal will be frequency that’s the result of the both of first two signals. On the other hand, the other frequency different from the first two frequencies. So much confusion??? Don’t worry Let be clear about it with an example-
Imagine, You mix an Audio tune and the tune has the frequency of 2kHz ( two kilohertz, or two thousand cycles per second) with their radio carrier signal of 2000KHZ So, finally you will get two signals at 1999 and the others is 2001. Of course, here 1999khz is lower sideband and 2001 is in the upper sideband. The carrier is a still and it shows the signal from or character in all occurrences Frequency. It stands between the two sideband but yes, at all it not really carrying anything. Also, it serves the zero reference to the sideband. As my example above, every sideband signal far away 2khz from the carrier signal. The receiver of AM radio mixed up the carrier with the sidebands pop out the actual audio signal. Once the reviler reference signal would be create by the circuit in to the reviser. The best thing is, you really don’t need to receive the carrier signal to take the audio. The ssb radio do the transmitter process the carrier and it is one of the best sidebands, Then the transmits the operator’s tone is less than 1/2 bandwidth of an AM signal. That’s why it is more good at using energy.